Signal Isolators & Converters

Product Details:

Signal Isolator With 2 input and 2 output.
Masibus signal isolator model 9000 is a rugged 4 wire isolator designed to accept of voltage and current input signals. Signal is then isolated and converted to standard instrumentation signals acceptable to commercially of the shelf (COTS) automation products. Masibus' Signal Isolator Model 9000U enables analog signals to transmit without galvanic connections between the field and the receiving instrument. This in turn allows ground or reference levels to float up to thousands of volts at its input terminals, and prevents circulating current between differing ground potentials that can contaminate input signal. Model 9000U will isolate the contaminated signal to a clean signal for accurate measurement and control application. Isolation provided by Masibus Model 9000U saves the control system from damage due to accidental application of high voltage or induced voltages on the input signal and in turn avoids wrong output signals to process. They also act as signal distributors when used with more number of outputs. Model 9000U series is available with multiple outputs up to 2 nos for signal distribution. A typical application could be where the signal has to be distributed for indication on local panel/ field control room/ main control room and DCS system. The Isolator provides a good protection for sensitive system parts against voltage spikes etc. Model 9000U offers a wide range of input/ output signal types include mA, mV, VDC. Built-in transmitter power supply (TPS) can drive field transmitters in case of 4-20mA DC input. Model 9000U offers excellent accuracy and stability for reliable operation in hostile environments and full isolation safely separates each input channel, each output channel and the power supply

Additional Information:

• Item Code: 9000UMGU2110

Product Details:

• 1-channel signal conditioner 
• 24 V DC supply (Power Rail) 
• Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources 
• Signal splitter (1 input and 2 outputs) 
• Dual output 0/4 mA ... 20 mA, current sink/current source 
• Terminals with test points 
• Up to SIL 3 acc. to IEC 61508

Product Details:

With the assistance of our talented team of professionals, we are providing a high quality range of Signal Transducer. Specifications It measure AC Current and converts it to an industry standard output signal Power source Electrical Features Trouble-free functionality Sturdiness Easy maintenance

Additional Information:

• Item Code: CT-01

Product Details:

Masibus Analog Input Field Interface Board has 8 channels that accepts various types of current/voltage signals and converts them to isolated current/voltage signals. It is compact universal DIN rail mounted with labeled input and output connections. Each channel zero and span calibration is adjustable by multi-turn potentiometers.

It is compatible with both 2 wire and 4 wire transmitters and has built-in transmitter power supply to power 2 Wire field transmitters.

Additional Information:

• Item Code: MAS-AI-08-D

Product Details:

Masibus signal isolator model 9000 is a rugged 4 wire isolator designed to accept of voltage and current input signals. Signal is then isolated and converted to standard instrumentation signals acceptable to commercially of the shelf (COTS) automation products. Masibus' Signal Isolator Model 9000U enables analog signals to transmit without galvanic connections between the field and the receiving instrument. This in turn allows ground or reference levels to float up to thousands of volts at its input terminals, and prevents circulating current between differing ground potentials that can contaminate input signal. Model 9000U will isolate the contaminated signal to a clean signal for accurate measurement and control application. Isolation provided by Masibus Model 9000U saves the control system from damage due to accidental application of high voltage or induced voltages on the input signal and in turn avoids wrong output signals to process. They also act as signal distributors when used with more number of outputs. Model 9000U series is available with multiple outputs up to 2 nos for signal distribution. A typical application could be where the signal has to be distributed for indication on local panel/ field control room/ main control room and DCS system. The Isolator provides a good protection for sensitive system parts against voltage spikes etc. Model 9000U offers a wide range of input/ output signal types include mA, mV, VDC. Built-in transmitter power supply (TPS) can drive field transmitters in case of 4-20mA DC input. Model 9000U offers excellent accuracy and stability for reliable operation in hostile environments and full isolation safely separates each input channel, each output channel and the power supply

Additional Information:

• Item Code: Model-9000U-S-C-U1-2-1

Product Details:

Features:
• 1-channel signal conditioner
• 24 V DC supply (Power Rail)
• Input 2-wire and 3-wire transmitters and 2-wire current sources
• Signal splitter (1 input and 2 outputs)
• Dual output 0/4 mA ... 20 mA
• Accuracy 0.1 %
• Up to SIL3 acc. to IEC 61508
Function
This signal conditioner provides the isolation for nonintrinsically safe applications. The device supplies 2-wire and 3-wire transmitters, and can also be used with 2-wire current sources. It transfers the analog input signal as two isolated current values. Both outputs provide a 0/4 mA ... 20 mA current corresponding to the input signal. The minimum available field voltage is 16 V at 20 mA. If necessary, the internal resistance of 250 Ω between terminals 8, 9 and 11, 12 can be used for conversion into a 0 V ... 5 V voltage signal. F

Additional Information:

• Item Code: KFD2-CR4-1-20
• Delivery Time: 7-10 Days

Product Details:

Features

• Available in Aux Powered (AP) and Loop Powered (LP) options
• Slim DIN rail mount design of 12.5mm for single output and 17.5mm for dual output
• Rugged & accurate 4 wire and 2 wire Isolator
• Switch option for 0/4-20mA, 0/1-5V and 0-10V I/O selection
• Extended universal power supply range: 20V to 265V DC or AC (Aux Powered Model)
• Up to 2 outputs with short circuit protection
• Full three port isolation
• High CMRR and NMRR
• High output load driving capability
• Wide zero & span adjustment limits
• Front calibration facility via multiturn trimpot
• Lowest long term drift
• Available with EMI-EMC compliance (optional)
• HART pass through feature (optional, available in AP compatible with 2 wire transmitter)

Applications

• Field interface device
• Isolation of field signals
• Distribution of signals
• Factory automation
• Translation of signals
• SCADA
• DCS
• Impedance matching of transmitters and receiver instruments
• Powering of field transmitters

Industries

• Power Stations
• Cement
• Waste Water Treatment Plants
• Sugar
• Pulp & Paper
• Metal
• Panel Manufacturing

Product Details:

• High accuracy class 0.25%
• Confirms to IEC 60688
• AC Line transducers for all requirements
• Excellent long term stability
• Low burden
• Transient protected
• Good isolation & impulse resistance
• Minimum ripple at the output
• Fast response
• Full power factor range operation
• ABS DIN rail mounting
• Range Available : V / I / W / VAR / PF / F
• mA/mV/V output available
• Average / True RMS

Product Details:

Features

• Compact DIN rail mount Design of 35mm for Single and Dual output
• Rugged & accurate 4 wire isolator
• Switch option for 0/4-20mA, 0/1-5V and 0-10V I/O selection
• Extended Universal Power Supply range: 20V to 265V DC or AC
• 2.0KVAC three port isolation
• Up to 2 outputs with short circuit protection
• High CMRR and NMRR
• High output load driving capability
• Wide zero & span adjustment limits
• Front calibration facility via Multiturn Trimpot

Applications

• Field Interface device
• Isolation of field signals
• Distribution of signals
• Translation of signals
• Factory automation
• SCADA
• DCS
• Impedance matching of transmitters and receiver instruments
• Powering of Field Transmitters
• Monitoring Application i.e. Battery voltage monitor

Industries

• Power Stations
• Cement
• Waste Water Treatment plant
  Sugar
• Pulp
• Paper
• Metal
• Panel Manufacturing

Product Details:

Masibus 9000LE Signal Isolators are compact yet rugged Isolators used for reliable isolation and transformation of industry standard field signals. 9000L model is available in one input with one or two output. 9000LE is available in one and two channel input/output with isolation.

9000L series Isolators are highly accurate, have low drift, low temperature coefficient, fast response, high noise rejection and housed in a compact DIN-Rail mount enclosure.
Model 9000L has Aux supply range of 20 to 265V AC/DC as a unique feature whereas model 9000LE has option of 2W Transmitter Input with HART pass through. With dual output option, these models also acts as signal distributor.

Features

• Compact DIN rail mounting of 35mm for single and dual output
• 2W transmitter input in 9000LE with HART pass
• Extended universal power supply range: 20V to 265V DC or AC for 9000L
• High KV 3 port isolation
• High accuracy, low drift, low temperature effect
• Input and output well protected
• Fast response suits all application
• High CMRR and NMRR

Applications

• Isolation of process field signals
• Signal isolation in VFD panels
• Distribution of signals in Automation Panels
• Protect systems against field over voltage/lightning convert/distribute signals
• Impedance matching of transmitters and receiver instruments
• Powering of field transmitters

Industries

• VFD Panel Builders
• Water Treatment Plants
• System Integrators

Additional Information:

• Item Code: 9000LE

Product Details:

Masibus 9000L Signal Isolators are compact yet rugged Isolators used for reliable isolation and transformation of industry standard field signals. 9000L model is available in one input with one or two output. 9000LE is available in one and two channel input/output with isolation.

9000L series Isolators are highly accurate, have low drift, low temperature coefficient, fast response, high noise rejection and housed in a compact DIN-Rail mount enclosure.
Model 9000L has Aux supply range of 20 to 265V AC/DC as a unique feature whereas model 9000LE has option of 2W Transmitter Input with HART pass through. With dual output option, these models also acts as signal distributor. 

Features

• Compact DIN rail mounting of 35mm for single and dual output
• 2W transmitter input in 9000LE with HART pass
• Extended universal power supply range: 20V to 265V DC or AC for 9000L
• High KV 3 port isolation
• High accuracy, low drift, low temperature effect
• Input and output well protected
• Fast response suits all application
• High CMRR and NMRR

Applications

• Isolation of process field signals
• Signal isolation in VFD panels
• Distribution of signals in Automation Panels
• Protect systems against field over voltage/lightning convert/distribute signals
• Impedance matching of transmitters and receiver instruments
• Powering of field transmitters

Industries

• VFD Panel Builders
• Water Treatment Plants
• System Integrators

Additional Information:

• Item Code: 9000L

Product Details:

Signal Isolator Model 9000U+SC21           input: 4-20mA output: 4-20mA (dual)

Product Details:

SIGNAL ISOLATOR   CONTROLLER Model  I/P  4-20mA O/P 4-20mA (DUAL)
 

Product Details:

As per the specific needs of the clients, we are engaged in providing a high quality range of Signal Isolators And Converter.

Features:

• Long service life
• Easy to operate
• Optimum performance

Additional Information:

• Item Code: 9000C-S-C-2-1

Product Details:

1-port RS-232/422/485 serial device servers › Small size for easy installation ›Real COM/TTY drivers for Windows and Linux › Standard TCP/ IP interface and versatile operation modes › Easy-to-use Windows utility for configuring multiple device servers › SNMP MIB-II for network management › Configure by Telnet, web browser, or Windows utility › Adjustable pull high/low resistor for RS-485 ports

Additional Information:

• Item Code: NPort5110

Product Details:

Signal Converter ( Current Transducer) Signal Converter ( Current Transducer) Signal Converter ( Current Transducer)

Additional Information:

• Item Code: 2PT-2024

Product Details:

• 24 V DC supply (Power Rail)
• Input for 2-wire SMART transmitters and current sources
• Signal splitter (1 input and 2 outputs)
• Dual output 0/4 mA ... 20 mA or 0/1 V ... 5 V
• Terminal blocks with test sockets

Product Details:

SC04U RJ45 D24          SAN TelequipRS232 to RS485/422    Converter

Product Details:

SC04U is used to convert RS232 devices to 2 / 4 Wire RS485 and vica versa. These converters are AC powered. They are used for running RS232 signals to long distance (1.2km). This converter can also facilitate multiple field devices to be multidropped on the RS485 and allow their connectivity to a RS232 device.

Additional Information:

• Item Code: SC04U

Product Details:

MVAr Transducer
PTR-400KV/110V , CTR- 1000/1,
Dual Output- 4 to 20mA, Accuracy- 0.5
Range ( -500 to +500) MVAr, Aux Supply- 230v AC or 220V DC or self powered.

Product Details:

Features and Benefits 
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baudrate for super fast data transmission
Drivers provided for Windows,

Additional Information:

• Item Code: NS-01

Product Details:

The IOLAN DS/TS Device Server is the best choice for simple serial to Ethernet connectivity applications. Delivering a cost effective solution in a compact size, the IOLAN DS/TS offers flexibility and advanced TrueSerial® technology making it ideal for applications that require an authentic serial connection across an Ethernet network. IOLAN DS1 Device Servers are also available with support for Extended Temperature Ranges.

• TrueSerial® delivers the most authentic serial connections across Ethernet
• 66 Mhz, 87 MIPS processor for the best perfomance on the market
• Indicators for network and serial interfaces for easy troubleshooting
• Plug & Play installation utility eliminates configuration hassles for all IOLANs on you IP network
• TruePort software provides true remote serial ports over an Ethernet LAN
• Share a serial port with multiple TCP or UDP servers
• Software Development Kit available to develop powerful custom applications
• Power over serial cable models eliminate costs of a separate power installation
• Next Generation IP support (IPv6) for investment protection and network compatibility
• Compact and protective solid steel enclosure for tabletop, wall mount or DIN rail mounting