Siemens PLC HMI

Product Details:

6GK1571-0BA00-0AA0 Siemens Simatic S7 PC Adapter USB communication adaptor, used for communication Siemens PLC Controllers. 

Product Details:

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24-48 V  AC/DC with single rooting, 1x 40-pole 

Additional Information:

• Item Code: 6ES7321-1CH00-0AA0
• Production Capacity: 3
• Delivery Time: 1 Day

Product Details:

SIMATIC S7-300, Digital input         SM 321, Isolated 32 DI, 24 V DC, 1x 40-pole

Additional Information:

• Item Code: 6ES73211BL000AA0

Product Details:

6ES7 288-1ST60-0AA0
30 KB program memory /20 KB data memory /max. 10 KB retentive memory 36 input points / 24 output points 256 bits input (I) / 256 bits output (Q) 56 words input (AI) / 56 words output (AQ) 256 bits

Additional Information:

• Item Code: 6ES7-288-1SR60-0AA0
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Description

The SIMATIC S7-1200 system includes three different CPU performance classes: CPU 1211C, 1212C CPU and CPU 1214C All can be enlarged in accordance with the mechanical requirements. For each CPU board, a signal can be added to expand digital or analog I / O without increasing the physical control. Signal Modules can be mounted on the right side of the CPU to extend the digital or analog I / O capacity

Simple and convenient installation
The complete SIMATIC S7-1200 hardware has built-in clip for quick and easy mounting on a standard 35 mm DIN rail. These built-in clip is also extendable. This means, they function as mounting holes for mounting without mounting rail. The SIMATIC S7-1200 hardware can be installed either horizontally or vertically and is absolutely flexible in the installation. 

Space saving design
The SIMATIC S7-1200 hardware has been specifically designed to save space in the cabinet. For example, the CPU is only 110 mm wide 1214C , and the CPU 1212C and the CPU 1211C are only 90 mm wide. Together with the small communication and signal modules, this modular system saves valuable space and provides maximum efficiency and flexibility in the installation process.

Technical data

 

• Loadable memory (pluggable): 1 MB extendable via Memory Card

 

 

Additional Information:

• Item Code: CPU1211C

Product Details:

The perfect integration of SIMATIC S7-200 SMART, Basic LINE HMI and SINAMICS V20/V90, forms the micro automation solutions that is cost-effective; meeting the OEM customer’s full range of demand.
The new S7-200 SMART has two different types of CPU modules, i.e. standard type and compact type. Standard type CPU is expandable with I/O expansion modules and signal boards. Compact type CPUs are non expandable with I/O expansion modules and signal boards.

Ethernet interfaceI/O expansion moduleRS485 serial port Signal board expansion Supporting Micro SD card Real-time clock High speed counters High speed pulse output
Only supports the standard type CPU module
only supports the standard type transistor output

Additional Information:

• Item Code: 6ES7-288-1ST40-0AA0

Product Details:

Simatic DP, im151-8 pn/dp cpu for et200s, 192 kb working memory, int. Profinet interface (with three rj45 ports) as io-controler, w/o battery MMC required

Additional Information:

• Item Code: IM151-8PN-CPU

Product Details:

8DI DC24V (6ES7131-4BF00-0AA0)
Dimensions and weight Width (mm) 15 Weight Approx. 35 g Module-specific data Supports isochronous operation Yes Number of inputs 8 Length of cable

• Unshielded max. 600 m
• Shielded Max. 1,000 m Parameter length 3 bytes Address space 1 byte Voltages, currents, potentials Rated supply voltage (from the power module) 24 VDC
• Reverse polarity protection Yes Electrical isolation
• Between the channels No
• Between the channels and backplane bus Yes Permissible potential difference
• Between the different circuits 75 VDC / 60 VAC Insulation test voltage 500 VDC Current consumption
• From supply voltage Dependent on the sensor Power dissipation of the module Typically 1.2 W Status, interrupts, diagnostics Status display Green LED per channel Diagnostics function No Data for selecting a sensor Input voltage
• Rated value 24 VDC
• For signal "1" 15 V to 30 V
• For signal "0" -30 V to 5 V Input current
• At signal "1" Typ. 5 mA (for 24 V) Input delay
• At "0" to "1" Typ. 3 ms (2.0 to 4.5 ms)
• At "1" to "0" Typ. 3 ms (2.0 to 4.5 ms) Input characteristic curve According to IEC 61131, Type 1 Connection of 2-wire BEROs Supported
• Permitted bias current Max. 1.5 mA

Additional Information:

• Delivery Time: 1-2 Weeks

Product Details:

SIMATIC DP, Bus module for ET 200M for holding two 40 mm wide I/O modules for removal and insertion function

Additional Information:

• Item Code: 6ES71957HB000XA0

Product Details:

SIMATIC S7-400                    , rack CR3, central with 4 slots

Additional Information:

• Item Code: 6ES74011DA010AA0

Product Details:

SIMATIC DP, IM151-8 PN/DP CPU f. ET200S, 192 KB work memory, int. PROFINET interface (with three RJ45 ports) as IO controller,without battery MMC required

Product Details:

SIMATIC S7-1200, COMMUNICATION MODULE CM 1241, RS232, 9 PIN SUB D (MALE), SUPPORTS MESSAGE BASED FREEPORT

hese Siemens CM 1241 Communication Boards are used for fast, high-performance serial data exchange via point-to-point connections. Point-to-point connection is possible to SIMATIC S7 automation systems, and the systems of many other manufacturers including printers, robot controls, modems, scanners and bar code readers, etc.

The communication boards are directly plugged into the CPUs, enabling the controller to be expanded without taking up any additional space. This allows users to adapt their controllers even to more complex tasks. If the task is expanded subsequently, the controller can be upgraded.

• SPS component SPS add-on module
• For fast, high-performance serial data exchange via point-to-point connection
• Implemented protocols ASCII, USS drive protocol, Modbus RTU
• Additional protocols can be loaded later
• Simple parameterization with STEP 7 Basic
• Can be plugged directly into the CPU
• Available with either RS422/485 9-pin D-Sub Female or RS232 9-pin D-Sub Male connections

The following standard protocols are available on the CM 1241 communication modules For interfacing to third-party systems with simple transmission protocols, e.g. protocols with start and end characters or with block check characters. The interface handshake signals can be called and controlled via the user program. Modbus For communication according to the Modbus protocol with RTU format Modbus master Master-slave interfacing with SIMATIC S7 as master. Modbus slave Master-slave interfacing with SIMATIC S7 as slave; message frame traffic from slave to slave not possible. USS drive protocol Instructions for connection of USS protocol drives are especially supported. In this case, drives exchange data over RS485. It is then possible to control these drives, and to read and write parameters. Further drivers for downloading are also available.

Additional Information:

• Item Code: CM1241-RS232

Product Details:

Additional Information:

• Item Code: 6ES7216-2AD23-0XB0

Product Details:

CPU 1512SP-PN siemens PLC CPU 1512SP-PN siemens PLCCPU 1512SP-PN siemens PLC CPU 1512SP-PN siemens PLC

Product Details:

Characteristic data of the DP interface of the CM 1243-5

• Number of DP slaves operable with a DP master: Maximum 16 For the constellation STEP 7 V11.0 and CPU firmware V2.0, resources are available for a maximum 16 DP slaves in total per station. The maximum number of operable DP slaves is reduced by the following modules or nodes: – CM 1242-5 slave modules plugged into the station of the DP Master – PROFINET IO devices connected to the station of the DP Master Example: Apart from the DP master module (CM 1243-5), there are two further DP slave modules (CM 1242-5). There are also 5 PROFINET IO devices connected to the CPU. In this case, the maximum number of DP slaves that can be operated on the CM 1243-5 is 9 (16 -2 -5 = 9).
• Total number of operable slots: Maximum 256 Any distribution of the slots as I slots and Q slots is permitted.
• Size of the DP data areas of the DP master: Max. 1024 bytes – Input area of the DP master in total: Max. 512 bytes – Output area of the DP master in total: Max. 512 bytes
• Maximum size of the DP data areas of the DP slaves – Input area per DP slave: Max. 244 bytes – Output area per DP slave: Max. 244 bytes – Diagnostics data area per DP slave: Max. 244 bytes

Additional Information:

• Item Code: CM1243-5

Product Details:

Communication Module : CM 01 , RS 485

Digital Signal Board

 

Analog Signal Board

 

Communication Board

Additional Information:

• Item Code: 6ES72885CM010AA0

Product Details:

Siemens Simatic Net CP 5711 Communications Processor Siemens Simatic Net CP 5711 Communications Processor

Additional Information:

• Item Code: CP5711

Product Details:

SIMATIC S7-400,   Backup battery 3.6 V/2.3 AH for PS 405 4 A/10 A/20 A and PS 407 4 A/10 A/20 A

Additional Information:

• Item Code: 6ES79710BA00

Product Details:

LOGO! 24RCO (AC), LOGIC MODULE, PU/I/O: 24V AC/24V DC/RELAY, 8 DI/4 DO; W/O DISPLAY, MEMORY 400 BLOCKS, EXPANDABLE, ETHERNET BIULD IN WEB-SERVER, DATALOG STANDARD MICRO SD CARD FOR LOGO! SOFT COMFORT V8 PREVIOS PROJECT USABEL

Additional Information:

• Item Code: logo

Product Details:

6ES7 288-1SR40-0AA0 Siemens s7 200 ( CPU SR 40) ( 6ES7 288 1SR40 0AA0 )  PLC     

Additional Information:

• Item Code: 6ES7-288-1SR40-0AA0

Product Details:

Logo! 24rco (ac), logic module, pu/i/o: 24v ac/24v dc/relay,
8 di
4 do;
w/o display,
memory 400 blocks,
expandable,
ethernet biuld in web-server,
datalog standard micro sd card for logo! Soft comfort v8 previos project usabel

Additional Information:

• Item Code: 6ED1052-2HB00-0BA8

Product Details:

Power consumption : 18W
User memory : 24 KB program memory /16 KB data memory /max. 10 KB retentive memory
On board digital I/O : 24 input points / 16 output points
Process image size : 256 bits input (I) / 256 bits output (Q)
Analog image : 56 words input (AI) / 56 words output (AQ)
Bit memory (M) : 256 bits
Temporary (local) memory : The main program has 64 bytes, each subroutine and interrupt program has 64 bytes
I/O module extension :  6 extension module

Product Details:

Today, visualization is part of the standard repertoire for most machines. The cost factor plays a crucial role in this case, especially for small machines and simple applications. HMIdevices with basic functions are often fully sufficient for simple applications.

This is exactly the demand that we intend to meet – with our new SIMATIC HMI Basic Panels. By concentrating on the essentials, the Basic Panels offer exactly those basicfeatures that are demanded – at the right price. A perfect cost-to-performance ratio.
Like all devices in our product catalog, the new Basic Panels offer proven SIMATIC quality and – regardless of their display dimensions – many software functions as standard: forexample, an alarm system, recipe management, trend functionality and language switching. Users therefore profit from the advantages of visualization, such as improved processquality, even with simple applications. 

Product Details:

SIMATIC S7-300, Analog output SM 332, isolated, 8 AO, U/I; diagnostics; resolution 11/12 bits, 40-pole, removing and inserting possible with active backplane bus.

Additional Information:

• Item Code: 6ES73325HF000AB0

Product Details:

SIMATIC S7-300, Analog input SM 331, Isolated 8 AI, resolution 13 bits U/I/resistor/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time; 1x 40-pol

Additional Information:

• Item Code: 6ES73311KF020AB0