Schneider AC Drive

Product Details:

Additional Information:

• Production Capacity: ATV12H075M2

Product Details:

General wiring diagramATV12ppppF1 (1-phase supply 100...120 V)
ATV12ppppM2 (1-phase supply 200...240 V)
ATV12ppppM3 (3-phase supply 200...240 V)Source 3-phase motor(1) R1 relay contacts, for remote indication of the drive status,If intermittent OSF code appear, set Relay R1 to FLt and it can be connected to upstream protection to avoid over voltage in the drive. In this case LO1 can be used for others drive status(2) Internal + 24 V c. If an external source is used (+ 30 V c maximum), connect the 0 V of the source to the COM terminal, and do notuse the + 24 V c terminal on the drive.(3) Reference potentiometer SZ1RV1202 (2.2 kΩ) or similar (10 kΩ maximum).(4) Optional braking module VW3A7005(5) Optional braking resistor VW3A7ppp or other acceptable resistor. See the possible resistor values in the catalog.Note:• Use transient voltage surge suppressors for all inductive circuits near the drive or coupled to the same circuit (relays, contactors, solenoid valves, etc.).• The ground terminal (green screw) is located on the opposite side in comparison with its position on the ATV11 (see wiring trap label).

Additional Information:

• Item Code: ATV12H037M2
• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Range of product Altivar 12Product or component type Variable speed drive Product destination Asynchronous motors Product specific application Simple machine Assembly style With heat sink Component name ATV12Quantity per set Set of 1EMC filter Integrated Built-in fan Without Network number of phases 1 phase[Us] rated supply voltage 200...240 V - 15...10 %Motor power kW 0.55 kW Motor power hp 0.75 hp Communication port protocol Modbus Line current 8 A 200 V6.7 A 240 VSpeed range 1...20Transient over torque 150...170 % of nominal motor torque depending on drive rating and type of motor Asynchronous motor control profile Quadratic voltage/frequency ratio Sensorless flux vector control Voltage/Frequency ratio (V/f)IP degree of protection IP20 without blanking plate on upper part Noise level 0 dB

Additional Information:

• Item Code: ATV12-H055M2

Product Details:

Adaptability and performances
The Altivar Easy 310 has been designed with an increased adaptability to different motors and various tough loads. One of its main quality is its torque capacity for starting and braking: b Braking capacity: v over 80 % of the rated motor torque without braking resistor v 150 % of the rated motor torque with braking resistor (see page 8) b Torque capacity v starting torque 150 % at 3 Hz v over torque : 150 to 170 %, depending on model (2). Easy to integrate in system The Altivar Easy 310 drive integrates as standard the Modbus communication protocol, which can be accessed via the RJ45 connector located on the underside of the drive 1 with a 2-wire RS 485 physical interface. To communicate on the network, the Altivar Easy 310 speed drive uses the Modbus RTU transmission mode. For more information on the complementary characteristics of the Modbus port (transmission speed, address, messaging...), please consult our local website. Logic input can be configured as source or sink by software, compatible with many PLCs. Easy to install The Altivar Easy 310 drives can easily and quickly be installed as: b they are easy and quick to wire due to their Plug & Play concept b they can be identified on the front panel. b they can be mounted side by side to save cabinet space. b power terminal and connection labels are easily identified and differenciated b a connection guideline is shown inside the front door. Easy to commission Human-Machine Interface (integrated keypad) The 4-digit display 2 can be used to display states and faults, access parameters and modify them via the navigation button 3. The RUN and STOP buttons 4 can be made accessible on the front panel by removing the blanking plate 5 from the door; they must be configured in order to be active. Remote display terminal The Altivar Easy 310 drive can be connected to a remote display terminal, available as an option. This terminal can be mounted on an enclosure door with IP 54 or IP 65 degree of protection. The maximum operating temperature is 50 °C/122 °F. It provides access to the same functions as the Human-Machine interface. Simple Loader and Multi-Loader configuration tools The Simple Loader tool enables one powered-up drive's configuration to be duplicated on another powered-up drive. Operation is very simple. The Multi-Loader tool enables configurations from a PC or drive to be copied and duplicated on another drive; the drives do not need to be powered up. The configuration can be loaded onto the drive without taking it out of its packaging. Easy to maintain A warning is sent by the drive to the user when it is necessary to clean heat sink or replace cooling fan. This fan, which is the only wearing part, can be changed without the need for any tool. The security of the system is ensured by an access code allowing authorized people to configure applications and settings in Configuration mode. Simple users are only allowed to use the Monitoring mode (parameters display).

Additional Information:

• Item Code: ATV310H037N4

Product Details:

Additional Information:

• Item Code: ATV71HD15N4

Product Details:

Additional Information:

• Item Code: ATV312HD15N4

Product Details:

1. ATV312H037N4 : variable speed drive ATV312 - 0.37kW - 1.5kVA - 32W - 380..500 V- 3-phase supply. variable speed drive ATV312 - 0.37kW - 1.5kVA - 32W - 380..500 V- 3-phase supply.

Additional Information:

• Item Code: ATV312H037N4

Product Details:

1. ATV312H055N4 : variable speed drive ATV312 - 0.55kW - 1.8kVA - 37W - 380..500 V- 3-phase supply. variable speed drive ATV312 - 0.55kW - 1.8kVA - 37W - 380..500 V- 3-phase supply.

Additional Information:

• Item Code: ATV312H055N4

Product Details:

1. ATV312HU11N4 : variable speed drive ATV312 - 1.1kW - 3.2kVA - 48W - 380..500 V- 3-phase supply. variable speed drive ATV312 - 1.1kW - 3.2kVA - 48W - 380..500 V- 3-phase supply.

Additional Information:

• Item Code: ATV312HU11N4

Product Details:

1. ATV312HU22N4 : variable speed drive ATV312 - 2.2kW - 5.9kVA - 79W - 380..500 V- 3-phase supply. variable speed drive ATV312 - 2.2kW - 5.9kVA - 79W - 380..500 V- 3-phase supply.

Additional Information:

• Item Code: ATV312HU22N4

Product Details:

Additional Information:

• Item Code: ATV12H055M2

Product Details:

Three-phase supply voltage: 380V...460V 50/60 Hz

Additional Information:

• Item Code: ATV310HU15N4

Product Details:

1. ATV312HD11N4 : variable speed drive ATV312 - 11kW - 25kVA - 397 W - 380..500 V - 3-phase supply. variable speed drive ATV312 - 11kW - 25kVA - 397 W - 380..500 V - 3-phase supply.

Additional Information:

• Item Code: ATV312HD11N4